Laserfiche WebLink
C <br />F. Other Facilities <br />1. Stake locations for other facilities as necessary for determining correct <br />locations and elevations for construction, and provide verification survey data <br />when indicated by the specifications for the item of work. <br />2. The surveyor will document as -built elevations at a minimum of 100 linear feet <br />along LFG well laterals and LFG standard horizontal collector, locations of <br />fittings, LFG wells, and label diameter and type. <br />1.05 SURVEYING ACCURACY AND TOLERANCES IN SETTING OF SURVEY <br />STAKES <br />A. Control traverse filed surveys and computations shall be performed to an accuracy <br />of at least 1:25,000. <br />B. The tolerances generally applicable in setting survey stakes shall be as set forth <br />below. Such tolerances shall not supersede stricter tolerances required by the <br />Specifications or Construction Drawings, and shall not otherwise relieve the <br />Contractor of responsibility for measurements in compliance therewith. <br />Type of Line or Mark Horizontal Position Elevation <br />Permanent reference points 1 in 10,000 10.01 foot <br />General excavation and 1 in 2,000 ±0.1 foot <br />earthwork <br />C. Tolerances for designed thicknesses shown on Construction Drawings and for <br />elevations shown on the Construction Drawings shall be as stated in Section 02200. <br />PART 2 - PRODUCTS <br />1 Not Used <br />PART 3 - EXECUTION <br />Not Used <br />PART 4 - MEASUREMENT AND PAYMENT <br />4.01 MEASUREMENT <br />A. Measurement for layout of work and surveys will be lump sum. <br />SHAW ENV/RONMENTAL, INc. <br />San Joaquin County — Extension of Cap Corral Hollow Sanitary Landfill — CH—Closure Cap Ext Proj_Technical Specs 4-19-12 Revl.DocRev. 0, 04/05/2012 <br />Layout of Work and Surveys <br />01052-5 <br />