Laserfiche WebLink
HAZARD MITIGATORS — DRILLING <br />* Do not run or rotate drill rods through rod slipping devices. No more than one foot of drill rod <br />column shall be hoisted above the top of the drill mast. Drill rod tool joints shall not be made up, <br />tightened, or loosened while the rod column is supported by a rod slipping device. <br />* Control dust using dust suppression techniques. <br />* Clean augers only when the rotating mechanism is in neutral and the auger is stopped. Tools such as <br />long handled shovels shall be used to remove cuttings from the auger. <br />* Cap and flag open boreholes; open excavations shall be barricaded. <br />* Keep all hand tool used during drilling operations clean and in good working condition. <br />* Wear hard hats and steel -toed boots at all times when performing drilling operations. <br />* Wear hearing protection when required. <br />Hazard Mitigators — Drilling 9/1/2015 <br />