COMPLIANCE INFO_2000-2012 - Laserfiche WebLink

Home Browse Search

Construction and Demolition and Inert Debris Transfer/Processing Regulations (Title 14, Chapter 3, Article 5.9, Sections 1738... Page 3 of 11 Transfer/Processing Operations (B) Handling any combination of green material, additives, amendments, compost, and Facilities Regulatory or chipped and ground material that does not exceed 500 cubic yards on-site at any Requirements one time; or Sections 17400 - 17405.0 Article 6.1 (C) The activity is located at the site of biomass conversion as defined in PRC section Siting and Design 40106 and is for use in biomass conversion at that site; or Sections 17406.1 - 17406.2 (D) The activity is part of a silvicultural operation or a wood, paper, or wood product Article 6.2 manufacturing operation; or Operating Standards Sections 17407.1 - 17413 (E) The storage of bagged chipped and ground material. Article 6.3 (b) Nothing in this section precludes the EA or the board from inspecting an excluded activity to verify that Record Keeping Requirements Section 17414 - 17414.1 the activity is being conducted in a manner that qualifies as an excluded activity, or from taking any appropriate enforcement action, including the use of a Notice and Order. The burden of proof shall be on the Article 6.35 owner and operator to demonstrate that the activities are excluded pursuant to this section. Additional Operating Requirements for Facilities Only Note: Sections 17415.1 - 17419.2 Authority cited. Article 8 Sections 40502, 43020, and 43021 of the Public Resources Code. Agricultural Solid Waste Management Standards Reference: Section 17801 - 17824 Sections 40053, 43020, and 43021 of the Public Resources Code. Section 17383. State Minimum Standards. (a) This section sets forth minimum standards that apply to CDI debris processing, inert debris processing and C&D wood debris chipping and grinding operations and facilities. (b) All small, medium and large CDI processing operations and facilities, inert debris processing operations and facilities and small, medium and large C&D wood debris chipping and grinding operations and facilities shall meet the State Minimum Standards requirements of CCR, Title 14, Division 7, Chapter 3.0, Article 6.2 and sections 17406.1, 17406.2 of Article 6.1 and 17414 of Article 6.3. (c) In addition, medium and large CDI debris processing facilities, inert debris processing facilities and medium and large volume C&D wood debris chipping and grinding facilities shall meet the State Minimum Standards requirements of CCR, Title 14, Division 7, Chapter 3.0, Article 6.35. Note: Authority cited: http://www.ciwmb.ca.gov/Regulations/Titlel4/ch3a59b.htm 5/2/2006