Laserfiche WebLink
Guide for Appliance Recyclers <br />June 2004 <br />Step 4: Remove the key(sometimes a screw or pressure -fit tab that holds the is <br />p ) <br />gas burner assembly in place. <br />Source; Vermont Agency of Natural Resources, Environmental Assistance Division <br />(www. anr. state. vt. usrdedeadrmercury/appman. pdt) <br />Step 5: Now that the gas burner assembly is loose, disconnect the gas feed line <br />from the gas safety valve by loosening the fitting with a crescent wrench or cutting <br />the gas line. Likewise, disconnect the gas safety valve from the gas burner <br />assembly. <br />Source: Vermont Agency of Natural Resources, Environmental Assistance Division <br />(www.anr state. vt. usrdeclead/mercury/appman. pol) <br />Step 6: Disconnect the gas feed line from the pilot light assembly by loosening or <br />cutting it. Sometimes there are two feed lines; if so, both should be disconnected. <br />Source: Vermont Agency of Natural Resources, Environmental Assistance Division <br />(www. anr. state. vt. usrdeclea&memury/a ppman. pdt) <br />19 <br />r� <br />r� <br />