Laserfiche WebLink
7. Brine sens isa"high liquid"alarm activated with sensor upside down? r YES r NO <br /> If No, provide additional information: <br /> 8. During checkout, did a Ryder Representative confirm that all communication is YES NO <br /> functioning properly? <br /> If No, provide additional information: <br /> 9. Isthe overfill alarm visible and audible at the tank fill point(s)and operating properly at 900/o? (If the HLAisnot <br /> programmed to activate at 90°/9 select N/A and note below) <br /> YES (- NO r. N/A <br /> If No or N/A, provide additional information:tanks have flappers <br /> 10. Isthe overfill alarm visible and audible at the tank fill point(s)and operating properly at 950/o? (If theHLAisnot <br /> programmed to activate at 95%select N/A and note below) <br /> YES (- NO r. N/A <br /> If No or N/A, provide additional information: <br /> In—Tank Gauging/Probe: <br /> 1. Hasall wiring been inspected for proper entry and termination, including testing for ground vaults? (visual <br /> inspection without disassembly of Jbox seal off,or use of mega ohm meter etc) <br /> YES r NO <br /> If No, provide additional information: <br /> 2. Any signs of cracking and swelling on tank gauge probes? r. YES r NO <br /> If yes, describe signs: <br /> WO# 2335977 <br />