FIELD DOCUMENTS - Laserfiche WebLink

Home Browse Search

h €Vi or boring. Any deviation from this'method must be approved by k the Director. 13.17.9. Sealing materials shall be placed in one:continuous operation unless conditions in the well or boring dictate that sealing operations be conducted in a staged manlier and prior approval is ' obtained from the Director. 1 13.17.10. Pressure required for the placement of.,sealing material shall be maintained long enough for sealing materials to properly set. 13.17.11. Verification shall be made to determine that an adequate seal has been installed by an EHD representative.' 13.17.12. If the well casing was left in place during sealing operations, a hole at least one foot larger in diameter than the originally drilled hole shall be excavated around theioutside of the well casing to a depth of 3 feet below the ground surface;and the well casing shall then be cut off 6 inches above the bottom of this excavation and removed. 13.17.13. The grout used to fill the well sliall be;allowed to spill over into the excavation, during the sealing operation, and fill it for a thickness of one foot and form a"cap"which has a diameter of at least one foot greater than the diameter of the originally drilled hole. 13.17.14. After the sealing operation and the sealing material have set, the excavation shall be filled with clean soil' 13.17.15. Any deviation from this section must obtain prior approval from the Director. If the casings of the shallower wells can be easily removed without breaking then the grouting will be conducted in stages. M.J. Kloberdanz.'& Associates will supervise the work and provide a final report of the activities. A well l�destruction permit application is i attached. ; i If you have any questions please do not hesitate to call. # Sincerely, f Michael J. Kloberdanz, REA, REHS ' M.J. Kloberdanz & Associates cc: Nagab G (Mike) Elsumeri j E � 2 {