ARCHIVED REPORTS_XR0008478 - Laserfiche WebLink

Home Browse Search

A-5 Residual substances generated during cleaning procedures that are known or suspected to pose a threat to human health or the environment were placed in appropriate containers until chemical testing had been completed to determine the proper means for their disposal 4.4 Conductivity, Temperature, and pH Specific conductance, water temperature, and pH measurements were made when a water sample was collected Regardless of the sample collection method, a representative water sample was placed in a transfer bottle used solely for field parameter determinations A conventional pH meter with a combination electrode or equivalent was used for field-specific conductance measurements Temperature measurements were performed using standard thermometers or equivalent temperature meters Combination instruments capable of measuring two or all three of the parameters may have also been used All instruments were calibrated in accordance with manufacturer methods The values for conductivity standards and pH buffers used in calibration were recorded daily in a field notebook All probes were thoroughly cleaned and rinsed with fresh water prior to any measurements, in accordance with Section 3 1 . 5.0 SAMPLE CUSTODY This section describes standard operating procedures for sample custody and custody documentation Sample custody procedures were followed through sample collection, transfer, analysis, and ultimate disposal The purpose of these procedures is to assure that (1) the integrity of samples was maintained during their collection, transportation, and storage prior to analysis and (2) post-analysis sample material was properly disposed of Sample custody is divided into field procedures and laboratory procedures, as described below 5.1 Field Custody Procedures Sample quantities, types, and Iocations were determined before the actual fieldwork commenced As few people as possible handled samples The field sampler was personally responsible for the care and custody of the collected samples until they were properly transferred 5 1 1 Field Documentation Each sample was labeled and sealed properly immediately after collection Sample identification documents was carefully prepared so that identification and chain-of-custody records could be maintained and sample disposition could be controlled Forms were filled out with waterproof . ink The following sample identification documents were utilized