Laserfiche WebLink
Page 3 of 10 <br /> tiff e u rof i ns Work Order Narrative <br /> Calscience <br /> Work Order: 19-01-2046 Page 1 of 1 <br /> Condition Upon Receipt: <br /> Samples were received under Chain-of-Custody (COC)on 01/31/19. They were assigned to Work Order 19-01-2046. <br /> Unless otherwise noted on the Sample Receiving forms all samples were received in good condition and within the <br /> recommended EPA temperature criteria for the methods noted on the COC. The COC and Sample Receiving Documents are <br /> integral elements of the analytical report and are presented at the back of the report. <br /> Holding Times: <br /> All samples were analyzed within prescribed holding times (HT)and/or in accordance with the Calscience Sample Acceptance <br /> Policy unless otherwise noted in the analytical report and/or comprehensive case narrative, if required. <br /> Any parameter identified in 40CFR Part 136.3 Table II that is designated as "analyze immediately"with a holding time of<= 15 <br /> minutes (40CFR-136.3 Table II, footnote 4), is considered a "field"test and the reported results will be qualified as being <br /> received outside of the stated holding time unless received at the laboratory within 15 minutes of the collection time. <br /> Quality Control: <br /> All quality control parameters (QC)were within established control limits except where noted in the QC summary forms or <br /> N <br /> described further within this report. <br /> 0 <br /> U <br /> Subcontractor Information: 0 <br /> Unless otherwise noted below(or on the subcontract form), no samples were subcontracted. <br /> Additional Comments: <br /> Air- Sorbent-extracted air methods (EPA TO-4A, EPA TO-10, EPA TO-13A, EPA TO-17): Analytical results are converted from <br /> mass/sample basis to mass/volume basis using client-supplied air volumes. <br /> Solid - Unless otherwise indicated, solid sample data is reported on a wet weight basis, not corrected for% moisture. All QC <br /> results are always reported on a wet weight basis. <br /> DoD Projects: <br /> The test results contained in this report are accredited under the laboratory's ISO/IEC 17025:2005 and DoD-ELAP <br /> accreditation issued by the ANSI-ASQ National Accreditation Board. Refer to certificate and scope of accreditation ADE-1864. <br /> 7440 Lincoln Way,Garden Grove,CA 92841-1427 • TEL:(714)895-5494 • FAX:(714)894-7501 <br />