Laserfiche WebLink
PRODUCT PIPING SUMP TESTING <br />Test Method By: <br />o Manufacturer 0 Industry standard Professional Engr Other (see below) <br />Test Method Uses: <br />IPressure r vacuum • Hydrostatic Other (see below) <br />Measuring Equipment Used: INCON TS -STS (Electronic Sump Test System) <br />Description <br />Tank #1 <br />Tank product <br />87 Gasoline <br />Sump material <br />FRP <br />Sump diameter (inches) <br />45 <br />Sump depth (inches) <br />48 <br />Height from tank top to highest <br />18 <br />piping penetration (inches) <br />Height from tank top to lowest <br />2 <br />electrical penetration (inches) <br />Method of sump attachment to tank <br />Coller <br />Condition of sump prior to testing <br />Dry <br />Portion of sump tested <br />Entire <br />Is system programmed for fail-safe operation? <br />Unknown <br />Was fail-safe verified to be operational? <br />No <br />Was sensor removed for testing? <br />Yes <br />Was sensor properly replaced after testing? <br />Yes <br />Depth of water level from tank top (inches) <br />20 <br />Wait time for water level to stabilize (hr:min) <br />:15 <br />Test start time <br />11:03 AM <br />Initial Probe Reading <br />2.8860 <br />Test end time <br />11:18 AM <br />Final Probe Reading <br />2.8855 <br />Test duration (hr:min) <br />0:15 <br />Change in water level (± 0.0000 inches) <br />-0.0005 <br />Pass/Fail threshold (±0.002 inches 11 Hr.) <br />0.0020 <br />TEST RESULT <br />PASS <br />Comments: <br />02017 Walton Engineering, Inc. <br />