Laserfiche WebLink
SWRCB,January 2002 Page of <br /> 9. FILL RISER CONTAINMENT SUMP TESTING <br /> Facility is Not Equipped With Fill Riser Containment Sums ❑ <br /> Fill Riser Containment Sumps are Present,but were Not Tested X <br /> Test Method Developed By: ❑ Sump Manufacturer ❑Industry Standard Professional Engineer <br /> ❑Other(Spec) <br /> Test Method Used: ❑Pressure n Vacuum ❑ Hydrostatic <br /> ❑Other(Spec) <br /> "Equipment Used: Equipment Resolution: <br /> LT Fill Sump# Fill Sump# Fill Sump# Fill Sump# <br /> Sump Diameter: <br /> Sump Depth: <br /> Height from Tank Top to Top of <br /> Highest Piping Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to y t <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material: ! <br /> Wait time between applying <br /> water and starting test: NI FATAL <br /> Test Start Time: l_,, �, :nnnTi�A ►�1 <br /> Initial Reading(RI): <br /> Test End Time: <br /> Final Reading(RF): <br /> Test Duration: <br /> Change in Reading(RF-RI): <br /> Pass/Fail Threshold or Criteria: <br /> Test Result: <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testing. <br /> Was sensor properly replaced and <br /> verified fiinctional after testing? <br /> Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />