Laserfiche WebLink
pm <br /> 2 i'"""ady ground all equipment <br /> Avoid standing in water when operating electrical equipment <br /> 9 If equipment must be connected by splicing wires,make sure all connections <br /> are properly taped, <br /> 2 Be familiar with specific operating Instructions for each place of equipment <br /> Chemical ilizarda <br /> 12-- Use personal protective equipment Indicated In Section 18. <br /> 1.9 _ Conduct direct reading air monitoring to evaluate respiratory and explosion <br /> hazards(list Instrument,action level,monitoring location,and action to be taken In <br /> Section 19). <br /> 12 Consult DHSO for personal air monitoring <br /> Temperature <br /> Hazards Heat Stress <br /> When temperature exceeds 70°F,take frequent breaks In shaded area. Unzip <br /> or remove coveralls during breaks. Have cool water or electrolyte replenishment <br /> solutionavallable. Drink small amounts frequently to avoid dehydration. Count the <br /> pulse rate for 30 seconds as early as possible In the rest period. If the pulse rate <br /> exceeds 100 beats per minute at the beginning of the rest period,shorten the work <br /> cycle by one-third, <br /> cold Stress <br /> _ Wear multilayer cold weather outfits. The outer layer should be of vrind resistant <br /> fabric, <br /> 00 to-30°F total work time Is 4 hours. Alternate 1 hour In and 1 hour out of the <br /> low-temperature area. Bslow-30°F,consult Industrial hygienist. <br /> Drink warm fluid. Provide warm shelter for resting. Use buddy system, Avoid heavy <br /> sweating, <br /> Trailer available on site for warm shelter. <br />