ARCHIVED REPORTS_XR0011973 - Laserfiche WebLink

Home Browse Search

. noting the time The sample-control officer at the laboratory verifies sample integrity and confirms that the samples are collected in the proper containers, preserved correctly, and contain adequate volumes for analysis These conditions are noted on a Laboratory Sample Receipt Checklist that becomes part of the laboratory report upon request If these conditions are met, each sample is assigned a unique log number for identification throughout analysis and reporting The log number is recorded on the chain-of-custody form and in the legally-required log book maintained by the laboratory The sample description, date received, client's name, and other relevant information is also recorded Equipment Cleaning Sample bottles, caps, and septa used in sampling for volatile and semivolatile organics will be triple rinsed with high-purity deionized water After being rinsed, sample bottles will be dried overnight at a temperature of 200°C Sample caps and septa will be dried overnight at a temperature of 60°C Sample bottles, caps, and septa will be protected from solvent contact between drying and actual use at the sampling site Sampling containers will be used only once and discarded after analysis is complete Plastic bottles and caps used in sampling for metals will be soaked overnight in a I- percent mtnc acid solution Next, the bottles and caps will be triple rinsed with deiomzed water Finally, the bottles and caps will be air dried before being used at the site Plastic • bottles and caps will be constructed of linear polyethylene or polypropylene Sampling containers will be used only once and discarded after analysis is complete Glass and plastic bottles used by Stratus to collect groundwater samples are supplied by the laboratory Before the sampling event is started, equipment that will be placed in the well or will come in contact with groundwater will be disassembled and cleaned thoroughly with detergent water, and then steam cleaned with deiomzed water Any parts that may absorb contaminants, such as plastic pump valves, etc will be cleaned as described above or replaced During field sampling, equipment surfaces that are placed in the well or contact groundwater will be steam cleaned with deionized water before the next well is purged or sampled Equipment blanks will be collected and analyzed from non-disposable sampling equipment that is used for collecting groundwater samples at the rate of one blank per twenty samples collected Internal Quality Assurance Checks Internal quality assurance procedures are designed to provide reliability of monitoring and measurement of data Both field and laboratory quality assurance checks are necessary to evaluate the reliability of sampling and analysis results Internal quality assurance procedures generally include Page 3