Laserfiche WebLink
SWRCB, January 2002 Page of <br /> 9. FILL RISER CONTAINMENT SUVA' TESTING <br /> i <br /> Facility is Not Equipped With Fill Riser Containment Sumps X <br /> Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br /> Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br /> ❑ Other (Spec) 111 <br /> Test Method Used: ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br /> ❑ Other (Spec) <br /> Test Equipment Used: Equipment Resolution: <br /> Fill Sump # Fill Sump # Fill Sump # Fill Sump # <br /> Sum Diameter: <br /> Sump De the <br /> Height from Tank Top to Top of <br /> Highest Pi in Penetration: <br /> Height from Tank Top to Lowest <br /> Electrical Penetration: <br /> Condition of sump prior to <br /> testing: <br /> Portion of Sump Tested <br /> Sump Material : <br /> Wait time between applying <br /> water and starting test: <br /> Test Start Time: <br /> Initial Reading (Ri): <br /> Test End Time : <br /> Final Reading (RF) : <br /> Test Duration: <br /> Change in Reading (RF-Ri) : <br /> Pass/FaU Threshold or Criteria : <br /> Test Result: <br /> Is there a sensor in the sump? <br /> Does the sensor alarm when <br /> either product or water is <br /> detected? <br /> Was sensor removed for testis ? <br /> Was sensor properly replaced and <br /> verified functional after testing? <br /> Comments — (include information on repalrs made prior to testing, and recommended fallow-up fbr failed tests) <br /> i <br />