Laserfiche WebLink
D. Results of Testing/Servicing <br /> Software Version Installed: 329.04 <br /> Complete the followingchecklist: <br /> N Yes ❑ Nom is the audible alarm operational? <br /> ® Yes ❑ No* Is the visual alarm operational? <br /> i <br /> ® Yes ❑ No* Were all sensors visually Inspected, functionally tested, and confirmed operational? <br /> ® Yes ❑ No' Were all sensors Installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their proper <br /> operation? <br /> ❑ Yes ❑ No* if alarms are relayed to a remote monitoring station, is all communications equipment (e.g ., modem) operational? <br /> ® NIA <br /> N Yes ❑ No' For pressurized piping systems, does the turbine automatically shut down If the piping secondary containment monitoring system detects a leak, <br /> ❑ WA fails to operate, or Is electrically disconnected? If yes: which sensors initiate positive shutdown ? (Check all that apply) N Sump french <br /> Sensors; N Dispenser Containment Sensors. <br /> Did you confirm positive shutdown due to leaks and sensor failure/disconnection? N Yes; ❑ No. <br /> ❑ Yes ❑ No* For tank systems that utilize the monitoring system as the primary tank overfill warning device (i.e. , no mechanical overfill prevention valve is <br /> ® NIA installed), is the overfill warning alarm visible and audible at the tank fill points) and operating property? If so, at what percent of tank capacity <br /> does the alarm trigger? % <br /> ❑ Yes ® No Was any monitoring equipment replaced? if yes, identify specific sensors, probes, or other equipment replaced and list the manufacturer name <br /> and model for all replacement parts in Section E, below. 1 <br /> []Yes* ® No Was liquid found Inside any secondary containment systems designed as dry systems? (Check all that apply) I <br /> ❑ Product; ❑ Water. If yes, describe causes in Section E, below. <br /> ® Yes ❑ No' Was monitoring system setup reviewed to ensure proper settings? Attach set up reports, If applicable <br /> N Yes ❑ No* Is all monitoring equipment operational per manufacturer's specifications? <br /> In Section E below, describe how and when these deficiencies were or will be corrected. <br /> 3 <br /> I <br /> E, comments: <br /> 1 <br /> I <br /> f <br /> i <br /> i <br /> i <br /> Monitoring System Certification Page 2 of 4 2/21 /07 <br /> I <br /> i <br />