Laserfiche WebLink
Recommended Practices for the Testing and Verification of Spill,Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities <br /> console. If the label is incorrect, contact the 8.3.7 Pass/Fall Criteria. If a sensor triggers an <br /> appropriate person. If no alarm is triggered, alarm when the alarm condition is simulated, and ' <br /> remove the sensor from the container, check the the sensor is correctly identified on the console,the <br /> connections, allow the liquid to drain from the sensor passes the test. <br /> sensor and immerse it into the liquid again.If the <br /> sensor is replaced,repeat the test procedure. If the sensor does not trigger an alarm when the <br /> alarm condition is simulated, the sensor fails the `^ <br /> 4. Remove the sensor from the test container and test. If the sensor is not correctly identified on the F <br /> allow the liquid to drain to clear the alarm. If console, notify the appropriate person to obtain <br /> product is used as the test liquid, follow the authorization to correct the sensor identification. <br /> manufacturer's instructions for cleaning the <br /> sensor before it is replaced. 8.4 Discriminating Sensors. The functionality of dis- <br /> 5.Reinstall the sensor in the proper location and criminating liquid sensors can be determined with the test <br /> method described in Section 8.3.6 and substituting the <br /> position. appropriate product for water. <br /> 6. Clear the alarm condition on the console. If R <br /> equipped with a printer, print the alarm report <br /> for facility records and indicate that a sensor <br /> functionality test was conducted. <br /> 7.Dispose of product-contaminated water accord- <br /> ing to the guidelines in Section 6.7. <br /> s <br /> 3 <br /> 4 <br /> C <br /> d <br /> a <br /> m <br /> n` <br /> c <br /> N <br /> r <br /> n <br /> i <br /> m <br /> 3 <br /> pei.org <br />