Laserfiche WebLink
Item # 207 <br /> Mag Plus Probe Installation Kits Riser Cap Kit for Mag Probe Installations <br /> Table 4: Metal cap and ring kit-Part No.312020-952 <br /> Quantity Description Part Number <br /> 1 Adapter ring and gasket 514100-332 <br /> 1 Cap and gasket 327869-003 <br /> 1 Group Cord Grip 331028-001 <br /> Note:watch orientation <br /> of bevels and tapers Metal capp <br /> when assembling these w/1/2°NPT o <br /> cord grip components. tapped hole <br /> 1 <br /> Cord Grip i Cap gasket 0 <br /> Nut ,Bushing <br /> Body __ <br /> Adapter ring <br /> Ring gasket <br /> Cord Grip Fitting ' <br /> Figure 4. Metal Cap and Ring Kit <br /> Modifying an Existing Metal Cap <br /> In order to ensure that the riser cap seals properly to the probe cable and riser,we recommend that you purchase <br /> one of the kits available for this purpose. Riser Caps from other manufacturers may require modification. If you use <br /> your own metal riser cap,you must drill and tap it for a cord grip fitting (P/N 331028-001) as follows. <br /> 1. Remove the cap to a non-hazardous location. <br /> 2. Drill and tap the cap for a 1/2"-14 NPT cord grip thread [Figure 5]. <br /> 1.625±0.062(41.27±1.6) <br /> ` .1/2"-14 NPT hole <br /> 1.438 x0.062(36.53±1.6) <br /> Figure 5. Modifying an Existing Metal Riser Cap ' <br /> 8 <br />