Laserfiche WebLink
www.opwgiobal.com ' _ <br /> 1-2100-PEVR Series 1-2100-DEVR Series OPW 1-2100-EVR <br /> Vapor Recovery Spill Container Product Fill Spill Container Series Direct Bury <br /> r Spill Containment <br /> - - For CARB/EVR <br /> The OPW Thread-On 1-2100-EVR Series <br /> '^ Spill Containers are certified for installation <br /> r- <br /> on OPW Phase I EVR Systems. All Fill <br /> Port Spill Containers feature an enhanced <br /> .. f, 1 DK-2100-EVR vapor tight drain valve <br /> (DEVR Models). The Vapor Return Spill <br /> y` Containers(PEVR Models)feature a <br /> permanent plug in the drain port as per <br /> s V a EVR requirements. The 1-2100-EVR Series <br /> Thread-On Spill Containers are available <br /> DRAIN PLUG 71SO40OC-EVR in Composite or Cast Iron bases with either <br /> SERIES OVERFILL 5 or 15-gallon buckets. <br /> PREVENTION VALVE <br /> The FSA-400 Threaded Riser Face Seal <br /> Adaptor is installed on the fill pipe below <br /> the spill container to provide a true sealing <br /> 'r surface for the drop tube flange on the <br /> 61 SO and 71 SO overfill prevention valve. <br /> The 61 SO and 71 SO series valves are <br /> installed in the base of the OPW EVR spill <br /> container with the patent-pending 61 JSK <br /> FSA-400 <br /> Threaded Riser Adaptor Jack Screw device.This configuration allows <br /> IDK-2100-EVR 61JSK liquid in the spill container to be drained <br /> Drain Valve Jack Screw <br /> USA Patent No.6,523,581 directly into the drop tube thereby isolating <br /> OPW Threaded Riser Adaptor (Face Seal Adaptor) the drain valve from the tank ullage, <br /> eliminating a notorious leak point <br /> An OPW FSA-400 Threaded Riser Face Seal Adaptor provides a flat,true sealing surface in previous systems. <br /> on threaded pipes where a gasket seal exists per EVR requirements. The FSA-400 is <br /> installed on the fill pipe riser below the spill container to provide a true sealing surface <br /> for the drop tube flange on the overfill prevention valves. The FSA-400 is also required <br /> on tank gauging risers and optional on vapor risers and rotatable adaptors. <br /> 61JSK (Jack Screw Device) <br /> Ordering Specifications <br /> Product# Description <br /> FSA-400 4"Face Seal Adaptor <br /> FSA-400-S 4"Short Face Seal Adaptor for Cast Iron Base Only <br /> Ordering Specifications <br /> Product# Description <br /> 61JSK-4410 Jack Screw Kit for Composite Base Spill Bucket <br /> 61JSK-44CB Jack Screw Kit for Cast Iron Base Spill Bucket <br /> 02013 OPW Fueling Components 9393 Princeton-Glendale Road • Hamilton,Ohio USA 45011 • Phone:(800)422-2525 + Fax:(800)421-3297 59 <br />