Laserfiche WebLink
ITEM#172-176 <br /> DO design the installation to allow for all movement(ground, vibration,etc.)after the installation. <br /> DO keep the hose free from all objects and debris. <br /> DO measure to ensure proper length of connector has been selected. <br /> DO handle and store the connectors carefully before an installation. <br /> DO follow all printed instructions included with the connectors. <br /> DO note the minimum bend radius as specified. <br /> DO install flexible connectors so that the bend is as close to the center of the connector as possible. <br /> DO keep the painted lay line straight and on the centerline of the connector. <br /> DO use a wrench only on the hex flats. <br /> DO use the manufacturer's recommended cathodic protection system or dielectric isolation boot. <br /> DO check for leaks before covering the installation. <br /> DO DON'T <br /> f <br /> 3 R <br /> I� <br /> - <br /> 4 <br /> �1, <br /> '� 4 +- q '•yrf <br /> 800-221-2319 • www.hosemaster.com <br /> 11 <br />