Laserfiche WebLink
Denitrification Reductions <br /> Denitrification is a process that occurs in the septic system drain field whereby certain <br /> bacteria oxidize the nitrate (NO3) in the wastewater and release nitrogen gas (N2) to the <br /> atmosphere. Due to the biologic processes in the shallow soils, nitrogen in the drain <br /> field may undergo a reduction between 10 percent to 35 percent. Soils with higher clay <br /> content, moist soil conditions, high pH, and organic material denitrify by about 35 <br /> percent, and soils with high sand content tend to denitrify at a lower rate of about 10 <br /> percent. <br /> A standard denitrification factor of 25 percent was selected for the Site because of the <br /> mixture of silt and sand present at the percolation test location. <br /> Nitrate Loading Estimate <br /> A nitrate loading scenario was employed to determine the impact from the proposed <br /> project to ground water. The scenario utilizes the variables discussed previously, which <br /> represent the estimated conditions and uses associated with this project. The following <br /> table presents a summary of the assumptions for the nitrate loading calculation for the <br /> Site, as presented in Plate 14. <br /> Table 3. Assumptions for Nitrate Loading Calculation <br /> Variable Value Units Description <br /> Q 200 gpd Effluent flow rate <br /> Nw 35 mg/L-N Effluent stream concentration <br /> A 1.51 acres Site area <br /> Nb 0.30 mg/L-N Concentration of rain <br /> d 0.25 constant Denitrification factor <br /> R 3.34 inches per year Recharge rate of rainfall <br /> W 1.8 inches per year Uniform waste water loading (calculated) <br /> The details of the nitrate loading calculation are included in Plate 14. The results of the <br /> calculation are presented in the following table. <br /> LOGE 20-25 Page 11 <br />