COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

EPA ID NUMBER _ .1D 000 633 032 6 15 Page _ of_ PERM" BY RULE UNIT SPECIFIC NOTIFICATION For Fixed Treatment Units Only (pursuant to Title 22. California Code of Regulations, Chapter 45) 7. Wastes, except asbestos, which have been classified by the Department as special wastes pursuant to Title 22, CCR, section 66261.124, may be treated by the following technologies: ❑ a. Chemical stabilization using silicates and/or cementitious types of reactions. ❑ b. Drying to remove water ❑ C. Phase separation by filtration, centrifugation or gravity settling. ❑ d. Magnetic separation. B. Inorganic acid or alkaline wastes may be treated by the following technology: ❑ a. PH adjustment or neutralization. 9. Soils cont-min-td with metals listed in Title 22, CCR, section 66261.24 (a)(2), (Persistent and Bioaccuttiniative Toxic Substances) may be treated by the following technologies: ❑ a. Chemical stabilization using silicates and/or cementitious types of reactions. ❑ b. Screening to separate components based on size. ❑ a Magnetic separation. l0. Used oil, unrefined oil waste, mixed oil, oil mixed with water and oil/water separation sludges may be treated by the following technologies: ❑ a. Phase separtion by filtration, centrifugation or gravity settling, but excluding super critical fluid extraction. ❑ b. Distillation. ❑ C. Neutralization. ❑ d. Separation based on differences in physical properties such as size, magnetism or density. ❑ e. Reverse osmosis. ❑ f. Biological processes conducted in tanks or containers and utilizing naturally occurring microorganisms. 11. Containers of 110 gallons or less capacity which are not constructed of wood, paper, cardboard, fabric, or any other similar absorptive material, which have been emptied as specified in Title 40 of the Code of Federal Regulations, section 261.7 or inner liners removed from empty containers that once held hazardous waste or hazardous material and which are not excluded from regulation may be treated by the following technologies provided the treated containers and rinseste are managed in compliance with applicable requirements: ❑ a. Rinsing with a suitable liquid capable of dissolving or removing the hazardous constituents which the container held. ❑ b. Physical processes such as crushing, shredding, grinding or puncturing, that change only the physical properties of the container or inner liner, provided the container or inner liner is first rinsed and the rinseate is removed from the container or inner liner. DTSC I772D (1/93) Page 18