Laserfiche WebLink
Ati7& cv7 E111 11 C)11PIzeiz Lll Nenvoi k <br /> PAGE 8 <br /> AEN (CALIFORNIA) <br /> QUALITY CONTROL REPORT <br /> AEN JOB NUMBER 9608284 <br /> CLIENT PROJECT ID D-101 <br /> Quality Control and Project Summar <br /> All laboratory quality control parameters were found to be within established <br /> limits <br /> Definitions <br /> Laboratory Control Sample (LCS)/Method Spike(s) Control samples of known composition LCS and Method Spike <br /> data are used to validate batch analytical results <br /> Matrix Spike(s) Aliquot of a sample (aqueous or solid) with added quantities of specific compounds and <br /> subjected to the entire analytical procedure Matrix spike and matrix spike duplicate QC data are advisory <br /> Method Blank An analytical control consisting of alt reagents, internal standards, and surrogate standards <br /> carried through the entire analytical process Used to monitor laboratory background and reagent contamination <br /> Not Detected (ND) Not detected at or above the reporting limit <br /> Relative Percent Difference (RPO) An indication of method precision based on duplicate ana€ysis <br /> I <br /> Reporting Limit (RL) The lowest concentration routinely determined during laboratory operations The RL is <br /> generally 1 to 10 times the Method Detection Limit (MDL) Reporting limits are matrix, method, and analyte <br /> i <br /> dependent and take into account any dilutions performed as part of the analysis. <br /> i <br /> Surrogates Organic compounds which are similar to anatytes of interest in chemical behavior, but are not found <br /> in environmental samples. Surrogates are added to all blanks, calibration and check standards, samples, and <br /> spiked samples Surrogate recovery is monitored as an indication of acceptable sample preparation and <br /> instrumental performance <br /> I <br /> D Surrogates diluted out <br /> i <br /> # indicates result outside of established Laboratory QC Limits. <br />