Laserfiche WebLink
Orenco Systems Inc. March 2002 <br /> AdvanTex AX10 Test Report <br /> 3.2 Stress Testing <br /> Stress testing did not appear to have an effect (either positive or negative) on the CBODS <br /> ` and TSS concentrations (see Figures 4 and 6). <br /> 3.3 Colour, Odour, Oil and Foam <br /> a <br /> 3.3.1 Colour <br /> G <br /> The NSF/ANSI Standard 40 protocol requires diluted effluent samples to have a value of <br /> 15 colour units or less to pass. The effluent from the AdvanTexTm AX10 passed all colour <br /> tests (see Table 2). <br /> 3.3.2 Odour <br /> Odour was tested by a panel of 5 evaluators (see Table 3). Some odour was noted by at <br /> least one evaluator with effluent samples taken on March 9" and November 14`". One <br /> evaluator thought the odour was mildly offensive on both dates. The sample taken on <br /> March 91" was the sample with the highest TSS and CBODS concentrations while that of <br /> November 14`" had the lowest TSS and CBOD5 concentrations of all four samples. <br /> 3.3.3 Oily Film And Foam <br /> No oily film or foam was noted in any of the effluent samples. <br /> 6. <br /> L <br /> L <br /> NovaTec Consultants Inc. Page 20 of 38 <br />