Laserfiche WebLink
SEACOR <br /> STANDARD SAFETY UTILITIES - GENERAL SSP 1 <br /> PROCEDURES <br /> 1.4.1 Utilities - General - SSP 1 -- <br /> Related SSPs: SSP 9 - Hot Processes - Steam <br /> SSP 12.1 - Machinery and Mechanized Equipment <br /> SSP 12.2 - Drill Rigs <br /> SSP 12.3 - Cranes/Lifting Equipment <br /> SSP 7 - Excavating and Trenching <br /> SSP 14.1 - Electrical Safety - General <br /> SSP 14.2 - Electrical Safety - High Voltage <br /> 1.4.1.1 Survey for and Identification of Utilities - SSP 1.1 <br /> Discussion <br /> • Prior to beginning work on site or in or around facilities, buildings or other structures that <br /> could be served by or connected to utilities, a search must be conducted by the SHSO or <br /> official locating service, ideally in association with someone familiar with the facility, to <br /> identify any overhead, underground and in-work place utilities such as: <br /> • Electrical lines and appliances <br /> • Gas lines <br /> • Pipelines <br /> • Steam lines <br /> • Water lines <br /> • Sewer lines <br /> • Pressured air lines <br /> The location of any utility that could pose a risk to workers must be communicated to all <br /> workers during site safety indoctrination. Utilities should be marked or access otherwise <br /> restricted to avoid chance of accidental contact. <br /> Utilities shall be considered "live" or active until a reliable source has documented them <br /> to be otherwise. <br /> 1.4.1.2 Overhead Utilities - SSP 1.2 <br /> Discussion <br /> For operations adjacent to overhead power lines, the following conditions must exist <br /> corp-h&slssp- 1 1-1 REVISED 10/26/92 <br />