ARCHIVED REPORTS_XR0003573 - Laserfiche WebLink

Home Browse Search

Site Safety and Health Plan Site Contamination Work Plan,ABF Freight Systems, Inc 2427 West Yosemite Avenue,Manteca,California F Freight System,Inc . Manteca, California Page 16 Protocol Summary. Monitoring will be performed with a PID to determine hydrocarbon concentrations in the operators breathing zone and at the source during tasks where exposure is likely Should levels be greater than 10 ppm in the breathing zone, respirators will be donned and operations will cease should levels reach 50 ppm 5.7 Decontamination Procedures Depending on the specific fob task, decontamination may include personnel themselves, sampling equipment, and/or heavy equipment The specified level of protection for a task (A, B, C, or D) does not in itself define the extent of personal protection or equipment decontamination For instance, Level C without dermal hazards will require less decontamination than Level C with dermal hazards And, heavy equipment will always require decontamination to prevent cross-contamination of samples and/or facilities The following sections summarize general decontamination protocols 5 7 1 Personnel • Use steps and procedures outlined below as guidelines for personnel decontamination • Brush loose soil from body, • Boot removal (where appropriate), • Suit removal (where appropriate), • Respirator/hard hat removal (where appropriate), • Respirator wash (where appropriate), • Glove removal, • Field wash hands 5 7 2 Samples and Sampling Equipment The same decontamination line will be used for sampling equipment and personnel decontamination At a minimum the following is performed • • Hand augers and buckets will be washed in TSP solution or equivalent and rinsed in distilled water N 1PR0]ECTS132721P1ans and ReportslDnlling SSHP 2 doe May 6, 1998