Laserfiche WebLink
AMERICAN INTERNATIONAL INDUSTRIES <br /> I <br /> MATERIAL SAFETY DATA SHEET <br /> Section 5. Fire Fighting Measures <br /> Flash Point(°F/°C): Not established <br /> Flammable Limit <br /> (vol%): Not applicable <br /> Auto-ignition Temp. Notapplicable <br /> (vol%) <br /> Extinguisher Media: Water spray, foam, carbon dioxide, dry chemical <br /> Fire Fighting Wear protective clothing to prevent contact with skin and eyes. <br /> Instructions: <br /> Fire Fighting Because fire may produce toxic thermal decomposition products, wear a self-contained breathing <br /> Equipment: apparatus (SCBA)with a full face piece operated in pressure-demand or positive-pressure mode. <br /> Section 6. Accidental Release Measures <br /> Spill or Release Personal Precautions: <br /> Procedures: This material is corrosive. Wear appropriate eye protection to prevent eye contact. Wear appropriate <br /> personal protective clothing to prevent skin contact. Immediately wash the skin when it becomes <br /> contaminated. Clothing that becomes wet or significantly contaminated should be removed and <br /> replaced. <br /> Environmental Precautions: <br /> None known <br /> Methods for Clean Up: <br /> Contain spill with sand or noncombustible material and place in an appropriate waste container for <br /> disposal. <br /> Section 7. Handling and Storage <br /> Handling: Avoid contact with eyes. Do not ingest. Keep out of reach of children. <br /> Storage: Store at room temperature. Keep away from extreme heat and freezing. Keep container closed. <br /> Section 8. Exposure Controls / Personal Protective Equipment <br /> Engineering Controls: Use exhaust ventilation to keep airborne concentrations below exposure limits. <br /> Page 2 of 5 <br />