COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

individual should leave the area at once. The PASS procedure is as follows: • Pull Pin: This unlocks the operating lever on the extinguisher and allows discharge of the extinguisher. Some extinguishers may have other devices that prevent inadvertent operation. • Aim Low: Point the extinguisher nozzle (or hose) at the base of the fire. • Squeeze: Squeeze the lever below the handle. This discharges the extinguishing agent. Releasing the lever will stop the discharge. Some extinguishers have a button that can be pressed for release of the extinguishing agent. • Sweep From Side to Side: Moving carefully toward the fire, keep the extinguisher aimed at the base of the fire and sweep back and forth across the fire until the flames appear to be out. Watch the fire area. If the fire reignites, repeat the process. 4. First Aid Procedures: a. Smoke Inhalation: Remove the individual to fresh air immediately. Call a physician immediately. Report the situation to representatives of the Fire Department or other emergency response organizations on the scene. b. Eye Irritation: Flush with large amounts of water for 15 minutes or until irritation subsides. Consult a physician. c. Skin Contact (dermal): Remove contaminated clothing and wash skin thoroughly with soap and water. If material is a caustic, flush thoroughly with large amounts of fresh water. d. Ingestion: Call emergency medical aid immediately. Consult the appropriate Safety Data Sheet (SDS) to determine if vomiting should be induced or if individual should be provided other first aid measures. e. Burns: Remove the individual from the heat source and call a physician immediately. Report the situation tc representatives of the Fire Department or other emergency response organizations on the scene. 5. Evacuation: Supervisors have the authority to direct an evacuation of the facility. Refer to Part 3 of this Actior Plan. Emergency Response Action Plan — Delta Truck Center Body Shop 1110 vALL ©KPA, LLC Page 6