Laserfiche WebLink
23 <br />cheeSe MelteR <br />P/N 1010983 Rev B 05/08 <br />troublesHooting (continued) <br />Problem Possible cause corrective action <br />Insufficient water entering <br />Generator casting.If Ready light does not light but the unit <br />steams regularly, the Ready light is <br />inoperable. <br />Contact your maintenance person or <br />Authorized Service Agency. <br />If the Ready light does light and the <br />unit does not steam, the control board <br />is inoperable. <br />Contact your maintenance person or <br />Authorized Service Agency. <br />*(Direct Feed units) Quick-disconnect <br />not connected properly or inoperable. <br />Make sure the quick-disconnect and <br />O-ring are properly positioned and <br />are not damaged. Replace damaged <br />parts. <br />Water volume adjustment is too low.Adjust the water volume control. See <br />Calibration section of the manual. <br />Water Filter clogged.Remove and clean Water Filter. <br />Inoperable solenoid or solenoid dam- <br />age caused by connecting a hot water <br />supply line. <br />Make sure unit is connected to a cold <br />water supply. Contact your mainte- <br />nance person or Authorized Service <br />Agency. <br />Inoperable Control Board.Contact your maintenance person or <br />Authorized Service Agency. <br />Steam coming out around <br />top cover or sides.Wing Nut is loose.Tighten Wing Nut.