Laserfiche WebLink
JUL -24-2018 TUE 10122 AM Able Maintenance FAX N0, 7075455515 P . 07 <br /> xC EA V <br /> THREADED ADAPTERS AND 1t1 , ZQi � <br /> REDUCER BUSHINGS <br /> Before making up threaded connections , inspect the threads . ENVIRONMENTAL <br /> Do not use fittings with damaged threads . Inspect all Ste* EALTH DEPARTMENT <br /> threads and remove any burrs . Threads must be clean and <br /> dry before applying thread lubricant. When using threaded <br /> adapters , thread them into the other system before bonding <br /> onto pipe , Unless a union is used , it may be impossible to <br /> turn the adapter into the mating thread . For best results use a <br /> strap wrench and a <br /> low 1 111101 <br /> Threaded Adapters <br /> Do not use thread sealing tapes . <br /> • Apply thread lubricant to all threaded surfaces . <br /> • Series 7000 or € 000 adhesives may be used in place of <br /> thread lube. Do not use PSX adhesives as a thread lube . <br /> Tighten to 1 to 11/2 turns past hand tight. <br /> • Do not use metallic wrenches that may cause damage <br /> to fittings. <br /> • Do not over tighten . Tighten the adapters as if they were <br /> brass or other soft material <br /> 29 <br />