Laserfiche WebLink
OPW Installation, Operation, and Maintenance Manual, Page 70 Executive Order VR-102-Q <br /> ~0-RING �- <br /> Installation Instructions: <br /> 1. Cut the tube to a length so that it is not more than <br /> 6"from the bottom of the tank. The tube can be <br /> cut at a 45-degree angle or per to-cal codes or <br /> requirements.File off any sharp burrs. <br /> Operation and Maintenance: <br /> Annually: Test the drop tube seal with CARB proce- <br /> dure TP-201.1C or TP-201.11). If the drop tube seal <br /> passes testing, no further maintenance is required. If <br /> the drop tube seal fails testing, replace the drop tube <br /> seal with OPW P/N: H11931 M for 4" Tubes. Re-test <br /> the drop tube seal with CARB procedure TP-201.1C or <br /> TP-201.1. <br /> OPW <br /> il,i„Nfi ffN T�,NNINT tYiTi Na <br /> ^l 3250 U5 70 Business West <br /> //��'l�yy Smithfield,NC 27577 <br /> MEMBER Customer Service:1-(800)422-2525 <br /> Technical Service and Questions: <br /> 1-(877)OPW-TECH <br /> www.opwglobal.com <br />