COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

n 1,12 :�; Materials j 10 Series Emergency Top:Cast iron Low Profile Patented Thermal Shut-Off Valves Relief valve OPW 10 Series Emergency Shut-off Body:Cast iron � 9 y Main Air Test Port Disc:M-19 Valves are installed on fuel supply , Poppet Secondary lines beneath dispensers at grade level Carrier:Zinc-plated steel Seat Poppet to minimize hazards associated with Stem:Copper-nickel-chrome-plated brass Fusible collision or fire at the dispenser. If the Poppet spring:stainless steel Link dispenser is pulled over or dislodged by Seal: M-19 0-Ring collision,the top of the valve breaks off Nickel-Plated, Packing nut:Brass,Teflon®-coated at the integral shear groove,activating Teflon-Coated 9 9 9 Inlet and outlet thread:1-1/2" (4 cm)NPT Main Stem poppets and shutting off the flow of fuel. (British threads available) Single-poppet models shut off supply "With black Duragard®E-Coating Combination Main Poppet Y flow,while double poppet models shut Features off supply as well as prevent release of fuel from the dispenser's internal 40- High Flow Capacity—the primary • Integral Test Port—a 3/8" (9.5 mm) j piping.The base of the emergency valve poppet is held out of the flow stream test port allows the piping system to be is securely anchored to the concrete while the secondary poppet is held air-tested without breaking any piping normally open to minimize head loss connections. dispenser island through a stabilizer bar across the valve and to protect the poppet .0, Patented Thermal Relief Valve— system within the dispenser sump or pan seals from damage and erosion.True relieves excessive pressure over 25 psi to ensure proper shearing action.The 1-1/2" (4 cm)and 2" (5 cm)body sizes caused by thermal expansion of fuel in the valve base is secured to the stabilizer ensure maximum flow. dispenser piping system in the event of bar using a three-point boss mount • Fire Protection—a fusible link trips fire(double-poppet models only). system or a U-Bolt Kit(not included) the valve closed at 165 F to shut off fuel ♦ Low-Profile Tops—female and union- 1 OUBK-015 (1-1/2")and 1 OURK- supply to the dispenser. top double-poppet valves have a low Main Poppet Seat Integral to the 0200(2 sold separately).Valve inlet pp g profile top to allow upgrading from OPW Top Assembly—having the main poppet single-poppet valves without changing (bottom)connections are female pipe seat as an integral part of the valve top existing piping. threads and outlet(top) connections ensures a new,clean seating surface is ♦ Multiple Mounting Options—valves are available with female threads,male installed each time the top is replaced. are boss-mounted to stabilizer bars in threads or a union fitting.Other options This design also ensures that the integrity sumps and pans or mounted to bars include suction system models with a of the seal between the valve top and embedded in the island with optional bottom is verified during line testing and U-Boltnormally closed secondary poppet which allows full inspection of the main poppet Versatile kits 1 Combination 15(not included). maintains prime,and models when the to is removed. Versatile Combination Body(boss mount/ p U-Bolt mount)models are available to with external threads on the inlet Duragard®-Coat Finish—provides accommodate most mounting applications body which connect to secondary superior corrosion resistance. with one valve style. containment systems. • Reliable Shut-off—a stainless steel • Underwriters Laboratories— 4l main spring,a teflon-coated brass packing listed for use with gasoline and 85%and nut and a copper/nickel/chrome-plated 100%methanol.All OPW 10 Emergency brass stem are designed to prevent tar Shut-Off Valves meet requirements of UL build-up and corrosion from interfering STANDARD 842. with poppet operation after long periods ♦ Compatible with 85%ethanol(E85) of normal service without activation. PA15 Offset Adaptor Ordering Specifications The OPW PA15 Offset AdaptorPart t1 Thread Size Offset Height Width is designed for adjusting in. mm in. mm in. mm in. mm misalignment of pipe in dispenser PA15-10 1V2 38.1 1 25 2v4 57.2 35/8 92.1 sumps and suction stubs. PA15-15 1'h 38.1 V12 38.1 2'A 57.2 4'/s 104.8 The PA15 has a low profile Materials feature,and is designed for PA15 20 1 /: 38.1 2 51 2/a 57.2 4' /s 117.5 maximum flow. Ductile Iron Zinc Chromate 9393 Princeton-066li Road Hamilton,Ohio 1 :1 :ra www.opwgiobal.com 119