Laserfiche WebLink
L31 , L44 <br /> Installation Instructions <br /> Extractor Valve Bodies <br /> Models 310, 3115 3305 331 & 340 <br /> Extractor valve bodies are designed to thread into a female bung on a tank. This <br /> thread joint is tapered pipe. It is very important that the installer select a suitable pipe <br /> thread sealant for the application. <br /> Prior to installing, inspect the valve body and tank bung threads for <br /> contamination, thread damage or rust. Remove all contamination & rust, dress <br /> any damaged threads. <br /> Apply the pipe sealant to the valve body male threads and install to tank. <br /> Torque threads to a minimum of 60 ft. lbs. then align body to piping arrangement by <br /> continuing to thread body in. Use this procedure to connect threaded connections <br /> brought to the valve body. <br /> Air test all threaded connections for leaks. Leak testing can be accomplished by <br /> installing pipe caps or plugs at the ends of all piping runs. <br /> Use test plug, part #391-201-01, if piping pressure tests exceeds the storage tank <br /> maximum allowable test pressure. <br /> EQI� <br /> A-th, Franklin Fueling Systems <br /> 3760 Marsh Road*Madison, WI 53718 U.S.A. <br /> Tel: +1 608 838 8786•Fax: +1 608 838 6433•www.franklinfueling.com <br /> ©2005 EBW F-6310 Rev. 1 Tel: USA& Canada 1 800 225 9787•Tel: M6xico 001 800 738 7610 <br />