Laserfiche WebLink
2 <br /> ® 8 AMERSHIELD TM9 <br /> Substrate temperature Dry to touch Dry to handle <br /> -50C (23°F) 8 hours 16 hours <br /> 0°C (32°F) 4 hours 10 hours <br /> 10°C (50°F) 1 .5 hours - 4 hours 6 hours - 36 hours <br /> 20°C (68GF) 45 minutes - 2.5 hours 3 hours - 10 hours <br /> 30°C (8 F) 25 minutes - 1 hour 2 hours - 5 hours <br /> Notes: <br /> - Range indicates drying time without and with PPG 866M (Amercoat 866M) accelerator, respectively <br /> - - 50C and 0°C data is only with PPG 866M (AMERCOAT 866M) accelerator <br /> - Adequate ventilation must be maintained during application and curing <br /> - Premature exposure to early condensation and rain may cause color and gloss change <br /> 00 <br /> Mixed product temperature Pot life <br /> 10°C (50°F) 4 hours <br /> 20°C (68°F) 2. 5 hours <br /> 30°C (WF) 1 hour <br /> Notes: <br /> Times are proportionally shorter at higher temperature and longer at lower temperatures <br /> PPG 866M (AMERCOAT 866M) accelerator will reduce pot life to half <br /> Product Oualifications <br /> Compliant with USDA Incidental Food Contact Requirements <br /> ® Nuclear Service Level 2 (partial) <br /> ® NFPA Class A Flame Spread <br /> SAFETY PRECAUTIONS <br /> ® For paint and recommended thinners see INFORMATION SHEETS 1430, 1431 and relevant Material Safety Data Sheets <br /> o This is a solvent-borne paint and care should betaken to avoid inhalation of spray mist or vapor, as well as contact <br /> between the wet paint and exposed skin or eyes <br /> Contains a toxic polyisocyanate curing agent <br /> ® Avoid at all times inhalation of aerosol spray mist <br /> WORLDWIDE AVAILABILITY <br /> It is always the aim of PPG Protective and Marine Coatings to supply the same product on a worldwide basis . However, slight <br /> modification of the product is sometimes necessary to comply with local or national rules/circumstances. Under these <br /> circumstances an alternative product data sheet is used. <br />