COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

equipped to handle the material, and a decontamination area set up. b) The limits of the suspected contaminated material will be delineated and the waste segregated from all non-hazardous waste streams. c) The suspected material will then be moved to a specially assigned remote or isolated area of the pit and marked. d) There, in isolation,the material will be retested to confirm contamination. e) Upon confirmation of the presence of any hazardous material, the source of the contaminated waste will then be notified for the material's proper and immediate removal to a correctly classified landfill. The LEA and the Regional Water Quality Control Board will be immediately notified of the incident. Steps to Compliance: A. Inspections and monitoring would be conducted by the EHSD or RWQCB as appropriate. 914 MM 4.5-3. This facility shall only accept dewatered Prior to commencement of Environmental Health 4.5-2 Class A and B biosolids, treated auto shredder waste, operations permitted by Services Department cogeneration ash (fly ash), spent sandblast media and planning approvals, and Kern County Planning lime filter cake. Verification must be obtained from during subsequent operations. Department. the State (CIWMB) of a solid waste facilities permit that is not subject to the State's Disposal Reporting System or an exemption to disposal reporting criteria of these wastes must be submitted to the LEA and the Planning Department prior to acceptance of waste. Acceptance of the following waste streams, (shredded auto tires, concrete/cement rubble, designated asphalt products and chipped construction lumber) shall be prohibited either for disposal or for beneficial use. A Loadcheck Program, as required by Title 27 and Title 14, [Quality Assurance/Quality Control Program Plan] shall also be developed and submitted to the Local 14 Final Board of Supervisors 3/15/16