Laserfiche WebLink
INXSPERSErm 23 RUGINE RED 57 Page:6/11 <br />Hand protection <br />Chemical -resistant, impervious gloves complying with an approved <br />Odor threshold <br />standard should be wom at all times when handling chemical products <br />pH <br />if a risk assessment indicates this is necessary.\'20 Considering the <br />Melting point <br />parameters specified by the glove manufacturer, check during use that <br />Boiling point <br />the gloves are still retaining their protective properties. It should be <br />Flash point <br />noted that the time to breakthrough for any glove material may be <br />Density <br />different for different glove manufacturers. In the case of mixtures, <br />Relative density <br />consisting of several substances, the protection time of the gloves <br />cannot be accurately estimated. <br />Body protection <br />Personal protective equipment for the body should be selected based <br />on the task being performed and the risks involved and should be <br />approved by a specialist before handling this product. <br />Other skin protection <br />Appropriate footwear and any additional skin protection measures <br />should be selected based on the task being performed and the risks <br />involved and should be approved by a specialist before handling this <br />product. <br />Respiratory protection <br />Use a properly fitted, air -purifying or air -fed respirator complying <br />with an approved standard if a risk assessment indicates this is <br />necessary.\'20 Respirator selection must be based on known or <br />anticipated exposure levels, the hazards of the product and the safe <br />working limits of the selected respirator. <br />Section 9. Physical and chemical properties <br />Appearance <br />Physical state liquid [liquid] <br />Color Red. <br />Odor <br />Faint odor. <br />Odor threshold <br />Not available. <br />pH <br />8.5-9.5 <br />Melting point <br />Not available. <br />Boiling point <br />Not available. <br />Flash point <br />Not Measured. Material is not expected to flash. <br />Evaporation rate <br />Not available. <br />Flammability (solid, gas) <br />Not available. <br />Lower and upper explosive <br />Lower: Not available. <br />(flammable) limits <br />Upper: Not available. <br />Vapor pressure <br />Not available. <br />Vapor density <br />Not available. <br />Density <br />1.143 g/cm3 <br />Relative density <br />1.14 <br />Solubility Not available. <br />Partition coefficient: n- Not available. <br />octanol/water <br />Auto -ignition temperature Not available. <br />Decomposition temperature Not available. <br />Viscosity Dynamic: Not available. <br />Kinematic: Not available. <br />Version: 1.72 Date of issue/Date of revision: 0911412016 Date of previous issue: 08/2412016 <br />