Laserfiche WebLink
FDA Tray OPV Last Down Page: 5/14 <br />ventilated area, away from incompatible materials (see Section 10) and <br />food and drink. Keep container tightly closed and sealed until ready for <br />use. Containers that have been opened must be carefully resealed and <br />kept upright to prevent leakage. Do not store in unlabeled containers. <br />Use appropriate containment to avoid environmental contamination. <br />Section 8. Exposure controls/personal protection <br />Control parameters <br />Occupational exposure limits <br />Ingredient name <br />Exposure limits <br />Fluoropolymer Wax <br />None. <br />Ammonium Hydroxide <br />None. <br />Appropriate engineering controls Good general ventilation should be sufficient to control worker <br />exposure to airborne contaminants. <br />Environmental exposure controls Emissions from ventilation or work process equipment should be <br />checked to ensure they comply with the requirements of <br />environmental protection legislation.\'20 In some cases, fume <br />scrubbers, filters or engineering modifications to the process <br />equipment will be necessary to reduce emissions to acceptable levels. <br />Individual arotection measures <br />Hygiene measures Wash hands, forearms and face thoroughly after handling chemical <br />products, before eating, smoking and using the lavatory and at the end <br />of the working period. Appropriate techniques should be used to <br />remove potentially contaminated clothing. Wash contaminated <br />clothing before reusing. Ensure that eyewash stations and safety <br />showers are close to the workstation location. <br />Eye/face protection Safety eyewear complying with an approved standard should be used <br />when a risk assessment indicates this is necessary to avoid exposure to <br />liquid splashes, mists, gases or dusts. If contact is possible, the <br />following protection should be worn, unless the assessment indicates a <br />higher degree of protection: safety glasses with side -shields. <br />Skin arotection <br />Hand protection Chemical -resistant, impervious gloves complying with an approved <br />standard should be worn at all times when handling chemical products <br />if a risk assessment indicates this is necessary. <br />Body protection Personal protective equipment for the body should be selected based <br />on the task being performed and the risks involved and should be <br />approved by a specialist before handling this product. <br />Version: 1.8 Date of issue/Date of revision: 09/27/2018 Date of previous issue: 09127/2018 <br />