WORK PLANS - Laserfiche WebLink

Home Browse Search

r GLOBAL® SPEC TO INSTALL WE DO IT ALL (10) Ceiling Supports: All ceiling panels shall be supported in accordance with the manufacturer's recommendations and the Architect's approval. Various support systems are available including: (a) Interior steel (column supported) (b) Exterior steel (wall or column supported) (c) Wire or all thread suspension (11) Soffit Closure Panels: Provide closure panels of materials matching the exposed exterior of the walk-in cooler/freezer for installation between the top of the insulated wall & the underside of the existing building finished ceiling (as indicated on the plans). Closure trim of matching material can be furnished wherever a space exists between the panels of the walk-in cooler/freezer and other building walls or columns. (12) Cantilever Shelving: Shelving shall be an adjustable cantilevered type furnished in the length, width, and number of tiers specified. All components to feature heavy gauge steel construction. Shelving is available in galvanized or stainless steel finishes. Construction will meet NSF standards when specified. Shelving to be of single piece construction and available in lengths up to 10'-0". Shelves are available in depths up to 30". Uprights shall be fabricated from two (2) 14 gauge, rolled steel channels, continuously seam welded. Brackets to be fabricated from 12 gauge steel. (13) Free-Standing Modular Shelving with Posts: Shelving shall be an adjustable type furnished in the length, width, and number of tiers specified. All components to feature heavy gauge steel construction. Shelves shall be fabricated of bright basic carbon steel or stainless steel rod. A rigid framework will extend around all four (4) sides and extend along the length of each shelf. At each corner of the shelf there shall be a tapered collar welded to the rigid framework. Each shelf shall have heavy gauge rods on 1" centers from front to back. Construction will meet NSF standards. There shall be a weld at every contact point between rods and between rods and rigid framework. Posts shall be made of 1" O.D. tubing and with a 16 gauge steel wall. Posts shall have grooves at 1" intervals for locating shelves. Posts to have a plastic cap at the top and a leveling bolt at the bottom. Shelving and posts are available in the following finishes. zinc and chrome plated, epoxy coated or stainless steel. (14) A Kason 1094 Door Closer with slotted hook for ease of adjustment: Shall be of heavy-duty steel construction with hydraulic mechanism. Devise automatically brings door to full closed position whenever door is ajar, within 10° of closed position. SECTION 1/PAGE 6 Due to continuous improvement programs, specifications are subject to change without notice.