COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

From: Bill Stoermer<bstoermer53@gmail.com> Sent:Thursday, August 13, 2020 2:29 PM To: Florido, Elianna [EHD] <eflorido@sigov.org> Subject: Re: Fremont Plaza Ace Hardware CAUTION:This email is originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. GeoAnalytical is determining whether or not they have enough samples of the key fines to conduct the additional tests you've requested; they had previously warned me about this possibility. Will let you know. Bill Stoermer On Wed, Aug 12, 2020 at 2:50 PM Florido, Elianna [EHD] <eflorido@s) og v.org> wrote: Hi Bill, Please forgive my delay to your 8/3/20 email. Also,thank you for providing the metal analysis for the key fines and pipe threader shavings. For a complete metals analysis on the key fines,the following tests are still needed: 1. A STLC test and a TCLP test on the Lead content in the key fines. 2. A STLC test on the Zinc content in the key fines. These tests will determine if the key fines are a federal hazardous waste, in addition to being a state hazardous waste. Depending on if the key fines are a federal and/or a state hazardous waste,you will need to ensure that Stericycle enters the appropriate federal and/or state waste codes on the hazardous waste disposal manifests.You may also take the key fines to the San Joaquin County Household Hazardous Waste facility, and you will have to disclose the appropriate federal and/or state waste codes, or the metal content,to the Household Hazardous Waste facility. Based on the metals analysis you provided,you may take the pipe threader shavings to a metal recycling facility, and you should keep recycling records, preferably a receipt from the recycling facility. The pipe threader shavings should have the cutting oil drained off prior to recycling the shavings. 3