COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 7. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Page of Comments — (include information on repairs made prior to testing, and recommended follotiv-arp for failed tests) ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to a� of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160) Test Method Developed By: ❑ UDC Manufacturer ❑ Industry Standard X Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum X Hydrostatic ❑ Other (Spec) Test Equipment Used: Caldwell Level Change Indicator Equipment Resolution: .002 UDC # 1&2 UDC # 3&4 JUDC# UDC # UDC Manufacturer: Bravo Bravo UDC Material: Fiberglass Coated Steel UDC Depth: 34" 10" Height from UDC Bottom to Top of Highest Piping Penetration: 18" Enters from bottom Height from UDC Bottom to Lowest Electrical Penetration: No Electrical Penetrations Enters from bottom Condition of UDC prior to testing: Dry Dry Portion of UDC Tested Water Level 22" Water Level 8" Does turbine shut down when UDC sensor detects liquid (both product and water)?* Yes No Turbine shutdown response time Not Alarmed N/A Is system programmed for fail- safe shutdown?* Yes Yes Was fail-safe verified to be operational?* No No Wait time between applying water and starting test 5 Minutes 5 Minutes Test Start Time: 9:47 8:57 Initial Reading (RI): .001 .001 Test End Time. 10:17 9:27 Final Reading (RF): .001 .001 Test Duration: 30 Minutes 30 Minutes Change in Reading (RF-Ri): 0 0 Pass/Fail Threshold or Criteria: .005/30 Minutes .005/30 Minutes Test Result: Pass Pass Was sensor removed for testing? Yes Yes Was sensor properly replaced and verified functional after testing? Yes Yes Comments — (include information on repairs made prior to testing, and recommended follotiv-arp for failed tests) ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to a� of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)