Laserfiche WebLink
Although we can perform this test without particular fuel levels, for the sake of avoiding a return trip please remember <br /> to have your fuel levels between 25-75%. If you have a total capacity of 33,000 gal of fuel or greater,your maximum <br /> ullage is 25,000 gal in order to check the vapor tightness of your site after the Overfill Inspection is complete. If you are <br /> expecting a fuel delivery on the day of the test, it needs to be completed more than 4 hours before testing can start. <br /> If these 2 conditions are not met,we may have to come out on a return trip to complete a Pressure Decay. <br /> Due to the nature of the testing, no fuel delivery can be made during the time of testing. If you do receive a fuel delivery <br /> too close to the start of testing,we will be delayed starting and may have to reschedule. Because we are unable to <br /> anticipate all repairs needed in order to finish the compliance testing, any repairs during the test that are completed will <br /> be at the discretion of the technician and are subject to additional charges, including, but not limited to labor, parts, re- <br /> testing, and travel. <br /> If you have any questions, please reply to this email or call the office. <br /> Thank you. <br /> Margaret Smith <br /> BZ Maintenance <br /> Office: 916-371-2380 <br /> Fax: 916-371-2540 <br /> msmithbzmaint@gmail.com <br /> 2 <br />