Laserfiche WebLink
Prevent water intrusion &drain any <br />fuel leaks back to the existing UDC <br />no matter the size or model <br />Water Splash for new dispenser <br />prevents water intrusion. <br />Typically 3/4" minimum height. <br />Possible water intrusion and/or <br />fuel release to island/grade and <br />void of warranty if UDC or <br />dispenser frame is modified <br />Angled plates to direct any <br />leaks from hydraulic cabinet <br />back into the existing UDC. <br />Raises dispenser 2" to <br />clear sump water splash <br />lip of existing UDC. <br />Height may be greater <br />than 2" depending on <br />application. <br />Structural supports for existing <br />concrete anchor bolts to secure <br />conversion frame to island / <br />pad. Bolt points vary based on <br />dispenser and range from 2-8. <br />Alternate /additional <br />structural supports <br />for new concrete <br />anchor bolts <br />G <br />New Dispenser <br />Anchor Bolt point. <br />These vary in number: <br />M bolt points. <br />(bolts are included <br />but not installed) <br />