Laserfiche WebLink
Double-wall and Double-bottom AST Requirements: <br /> *Double-wall AST's do not require UTT readings for the primary tank.If Corrosion is evident on the outside <br /> surface of the secondary tank, UTT readings are required. <br /> Verify leak detection equipment or method is operating(if tank is so equipped):Yes <br /> Check for leaks/liquid in the interstice: Interstice was clear at the time of inspection. <br /> - If liquid was found in the interstice,were thickness measurements taken of the secondary tank:Yes No <br /> - If product was found in the interstice,was a leak test performed on the Primary Tank:Yes No <br /> Any areas of the Double-bottom AST single wall:N/A <br /> - If yes,were UTT readings of the single wall areas of the AST taken(Required):Yes No <br /> Water found/observed in t ?No <br /> Determination Method. onitoring syste Water paste/Fuel sample/Other:_Print out reviewed. <br /> Notes/Comments about the Inspection: See Notes in SP001 Report. <br /> Required Actions for Continued Service: See Notes in SP001 Report. <br /> Recommended Actions for Continued Service: See Notes in SP001 Report. <br /> Data Collected Onsite: <br /> UT Readings ��Othe�r <br /> Tank Drawings/Leak Test/Previous Inspection Reportsa es esult <br /> Tank Suitable for Continued Use as of Inspection Dat : *Yes No*Assumes required actions are implemented. <br /> Next Formal SP001 Inspection Due By: 11/24/2025 <br /> 5 <br />