Laserfiche WebLink
GEOFLOW, INC http://www.geof conn/wastewater/Operations%20a... <br /> SYSTEM.COMPONENTS: <br /> Atypical drip system installation will consist of the elements listed below: <br /> 1 1. WASTEFLOW® DRIPLINE <br /> WASTEFLOW lines carry the water into the dispersal/reuse area.WASTEFLOW <br /> lines are connected to the supply and return with Compression or Lockshp fittings. <br /> Standard spacing between lines and emitters is 24" on center. The dripline has no <br /> joints that may pull apart during installation and is ideal for tractor mounted burying <br /> machines. It is sold in 500-ft rolls. For export 400-m rolls are available. Rolls of <br /> alternative lengths may be special ordered. <br /> WASTEFLOW dripline features: <br /> a) ROOTGUARD® <br /> The risk of root intrusion with an emitter slowly releasing nutrient rich <br /> effluent directly into the soil is well known to anyone who has observed a <br /> leaking sewer pipe. Geoflow has an exclusive license forROOTGUARD, to <br /> protect emitters from root intrusion.ROOTGUARD carries a 10-year <br /> warranty against root intrusion. <br /> b) Turbulent flow path <br /> Wasteflow drip emitters are pre-inserted in the tube 6", 12" or 24" apart with <br /> 24" being the most popular. Angles in the emitter flow path are designed to <br /> cause turbulence in order to equalize flow between emitters and keep the <br /> emitters clean. Geoflow emitters boast large flow paths, which, coupled with <br /> turbulent flow, have proven over the years to be extremely reliable and <br /> dependable. <br /> c) Bactericide <br /> Geoflow's WASTEFLOW has an inner lining impregnated with a bactericide, <br /> Ultra Fresh DM-50, to inhibit bacterial growth on the walls of the tube and in <br /> the emitter. <br /> d) WASTEFLOW Classic and WASTEFLOW PC Dripline <br /> For WASTEFLOW Classic the flow rate delivered by the emitter is a function <br /> of the pressure at the emitter. WASTEFLOW PC will have a constant flow <br /> rate at all pressures from 7 to 60 psi - to ensure a long life the recommended <br /> operating range is 10 to 45 psi. <br /> WASTEFLOW Classic Specification <br /> The dripline shall consist of nominal sided one half inch linear loin density polyethylene tubing, with <br /> turbulent flow, drip emitters bonded to the inside wall. The drip emitter flow passage shall be <br /> 0.053"x 0.053"squares The tubing shall have an outside diameter(0.D) of approximately <br /> .64-inches and an inside diameter(I.D) of approximately.55-inches. The tubing shall consist <br /> 4 of 12 o/1nlnnn^f n_cn nx,r <br />