COMPLIANCE INFO_2019 - Laserfiche WebLink

Home Browse Search

UNDERGROUND STORAGE TANK MONITORING SYSTEM CERTIFICATION FORM (Page 4 of 61 VIIIV MONITORING SYSTEM AND PROGRAMMING This section must be completed if a monitoring panel is used to perform leak detection monitoring. Y N NA Are the visual and audible alarms operational? ® ❑ ❑ Were all sensors visually inspected for kinks and breaks in the cables and for residual buildup to ensure that floats move freely , ® ❑ functionally tested, and confirmed operational? Were all sensors installed at lowest point of secondary containment and positioned so that other equipment will not interfere with their ® ❑ ❑ proper operation? Was monitoring system set-up reviewed to ensure proper settings? ® ❑ ❑ Was the monitoring panel's backup battery visually inspected , functionally tested, and confirmed operational? _ ® ❑ ❑ Does the flow of fuel stop at the dispenser If a leak is detected in the underAispenser containment? ® ❑ ❑ Does the turbine automatically shut down if the piping secondary containment monitoring system fails to operate or is electrically ® ❑ ❑ disconnected? Does the turbine automatically shut down if the piping secondary containment monitoring system detects a leak? ® ❑ ❑ Which sensors initiate positive shut down? (Check all that apply.) ® Sump ® UnderAlspenser containment If alarms are relayed to a remote monitoring station , is all communications equipment (e.g . modem) operational? ® ❑ ❑ For any answer of "N" above, describe in section 1X how and when these deficiencies were or will be corrected. _ IX. COMMENTS X. IN-TANK GAUGING TESTING Check this box if tank gauging is used only for inventory control. (Do not complete this section.) ❑ Check this box if NO tank gauging equipment is installed. (Do not complete this section.) Y N NA This section must be completed if in-tank au in is used to perform leak defection monitoring. Has all input wiring been inspected for kinks and breaks in the cables and for proper entry and termination , including testing for ground [30 ❑ fauks? Were all in-tank gauging probes visually inspected for damage and residue buildup to ensure that floats move freely, functionally tested, 01 01 El j and confirmed operational? I Was accuracy of system's product level readings tested? ❑ ❑ ❑ Was accuracy of system's water level readings tested? 01 ❑ ❑ E Were all probes reinstalled property? ❑ 01 ❑ 4 Were all items on the equipment manufacturer's maintenance checklist completed? ❑ ❑ ❑ For any answer of "N" above describe in section Xl how and when these deficiencies were or will be corrected. XI . COMMENTS € Y = Yes, N = No, NA = Not Applicable i