Laserfiche WebLink
0 0 <br />Permit Unit Requirements for N -7617-4--y" (continued) `"' Page 2 of 2 <br />11. All records shall be maintained and retained on-site for a period of at least 5 years and shall be made available for <br />District inspection upon request. [District Rules 1070 & 4566] <br />12. All bulk material transport vehicles shall limit Visible Dust Emissions to 20% opacity by either limiting vehicular <br />speed, maintaining sufficient freeboard on the load, applying water to the top of the load, or covering the load with a <br />tarp or other suitable cover. [District Rules 8011 and 8031] <br />13. An owner/operator shall prevent or cleanup any carryout or trackout in accordance with the requirements of District <br />Rule 8041 Section 5.0, unless specifically exempted under Section 4.0 of rule 8041 or Rule 8011. [District Rule 8041] <br />14. Any new or existing public or private paved or unpaved road, road construction project, or road modification project <br />shall implement the control measures and design criteria of, and comply with the requirements of District Rule 8061 <br />(Paved and Unpaved Roads), unless specifically exempted under section 4.0 of Rule 8061. [District Rule 806 1] <br />15. Water, gravel, roadmix, or chemical/organic dust stabilizers/suppressants, vegetative materials, or other District - <br />approved control measure shall be applied to unpaved vehicle travel areas as required to limit Visible Dust Emissions <br />to 20% opacity and comply with the requirements for a stabilized unpaved road as defined in District Rule 8011. <br />[District Rules 8071 and 8011] <br />16. On each day that 50 or more Vehicle Daily Trips or 25 or more Vehicle Daily Trips with 3 axles or more will occur on <br />an unpaved vehicle/equipment traffic area, the permittee shall apply water, gravel, roadmix, or chemical/organic dust <br />stabilizers/suppressants, vegetative materials, or other District -approved control measure as required to limit Visible <br />Dust Emissions to 20% opacity and comply with the requirements for a stabilized unpaved road as defined in District <br />Rule 8011. [District Rules 8071 and 8011] <br />17. Whenever any portion of the site becomes inactive, the permittee shall restrict access and periodically stabilize any <br />disturbed surface to comply with the conditions for a stabilized surface as defrried in District Rule 8011. [District Rules <br />8071 and 8011] <br />18. This permit does not authorize the facility to operate without the required permits from other local, state or federal <br />agency and does not authorize the violation of any conditions established for this facility in the Conditional Use Permit <br />(CUP), Special Use Permit (SUP), Site Approval, Site Plan Review (SPR), or other approval documents issued by a <br />local, state or federal agency. [District Rules 2070 and 2080, and Public Resources Code 21000-21177: California <br />Environmental Quality Act] <br />These terms and conditions are part of the Facility -wide Permit to Operate. <br />Facility Name: HARVEST POWER CALIFORNIA LLC <br />Location: 816 FREWERT ROAD,LATHROP, CA <br />N-70174-1 : AUB 17 2012 1-24PM - Ch4W <br />