COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

GONE �,CO/JF =c°a� �eiOm =e°ter ey�m Certificate Number:02-019A24 Page 4 of 19 ANO �S ANO Gilbarco,Inc. Retail Motor Fuel Dispenser(RMFD)/Nxx Series Examples: The ENTER Key is used to display blend ratios and the number of times the blend ratios and volume units have been adjusted. While in this mode, a flashing "P"will be displayed in the leftmost digit of the money display. The CLEAR key is used to exit blend info mode.The unit will also exit blend info mode after 1 minute has elapsed.This key does not require a security code. Blend Information is Displayed in the Following Format: • Sale Display:XXXX—Number of times blend ratios have been adjusted.Example—0018 would indicate that the blend ratios have been changed 18 times. • Volume Display:XXXX—Number of times volume units(Gallon/Liter)have been adjusted. Example—0019 would indicate that the volume unit has been changed a total of 18 times. • PPU Grade Display: XXX—Each PPU Grade will display the percentage of the lowest octane pure product portion of the blend. Example—PPU 1 = 100,PPU 2= 83,PPU 3 =75. This would indicate that grade one was composed of 100% of the low octane pure product, grade two was composed of 83% of the low octane pure product and grade three was composed of 75% of the low octane pure product. MPD(Non-Blender)Information is Displayed in the Following Format: • Sale Display:XXXX—Blank • Volume Display: XXXX—Number of times volume units (Gallon Liter) have been adjusted. Example—0019 would indicate that the volume unit has been changed a total of 18 tunes. • PPU Grade Display:XXX—Blank Operation: Gilbarco Smart meter,Model number M02950A001 or Gilbarco E-Meter Model M07300xx is an alternate to the Gilbarco C+meter and the LC M5 series meters and is located in the side column of the dispenser. The Gilbarco "Smart Meter"(is a counter rotating twin turbine inferential meter that accurately meters retail motor transportation fuels. Diesel fuel, gasoline, gasoline/ethanol, and gasoline/methanol blend types of products. Each meter is equipped with an electronic printed circuit board that contains a "calibration curve" that is unique to that individuals meter's configuration (bore size, internal components such as bearings, spacers and rotors including the individual tolerances of all components). Replacement of any internal component changes the metrological characteristics of the meter.The calibration curve data cannot be assessed or changed in the field. The PBC is encapsulated to prevent tampering.Rotations of the turbines are detected by electronic pick-ups(located on the PCB)through the meter body. This electronic signal is then converted to volumetric display by the dispenser electronics. Traditional Gilbarco Pulsers are not used. The meter is not suitable for field repair. The Gilbarco E-Meter Model M07300Axx series (CoC 02-040A3) also located in the side column, is a twin spindle positive displacement meter does not have any adjustable or metrological calibration features. Gilbarco provides a factory installed, tamper evident decal/seal containing the Gilbarco Inc.name,Trademark or logo,and a non-repetitive serial number.Destruction or absence of the tamper evident seal indicates that the meter's internal mechanisms have been accessed. While the meter does not have any adjustable or metrological calibration features, the inspector should verify that access to the meter's internal mechanisms has not altered the metrological integrity of the device. The meter does not contain any field serviceable components. The vacuum-assist vapor recovery option for the Encore® Series consists of an explosion-proof motor driving a vacuum pump. The motor(s)/pump(s) are in the hydraulic section of the dispenser. The PC board for the electronic vacuum pump-controller is in the electronic section of the dispenser.The PC board monitors the rate at which gasoline is dispensed and then proportionally controls the motor(s)/pump(s) speeds. The rate of vapor recovery is proportional to the product flow rate. Each hose is equipped with an electronically operated vapor valve,which operates without isolating hoses.