COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

Certificate Number:02-019A24 Page 12 of 19 Gilbarco,Inc. Retail Motor Fuel Dispenser(RMFD)/Nxx Series Page I -removed the section concerning Super Hi models. These models have not and will not be produced. Standard Features and O tions Meter Model T19976-GX' or V3 M0730OA001 P9XXX Numbers: T19976-G5 M0730OA002 M0730OA003 Used in Dispenser: 1 Standard(Up to E25) Standard Ultra Hi Alternate Fuels 85 Name: "C"+"V+"Meter Ecometer LC M5 Series Minimum Flow Rate: 0.5 GPM 0.5 GPM 5 GPM Maximum Flow Rate: 12 GPM 10 GPM 60 GPM Page 1 -Added Manager Keypad to the options section. Page 2-Added the following to the applications section. Due to security concerns and theft issues,many stations have removed the Managers Keypad from the unit. W&M's officials may to contact station personnel to obtain this keypad. The station will provided Managers keypads. The Managers Keypad may be shipped separately from the dispenser. Sealing-Changed from Category 1 to Category 2 device. Page 2 - Added the following to the Application Section: Gilbarco self-contained dispensers (units with a pump and a motor) are provided with onboard automatic air elimination. Gilbarco remote dispensers(units that do not have motor and pump)require the use of a remotely located pump. These remote dispensers require automatic air elimination at the remote pump/STP,or the use of a low product cut off that will prevent air from entering the pump if the fluid level in the tank falls below a point that air could be ingested into the system or the use of other automatic means to prevent air from entering the system. Page 15 - (CoC 02-019A7) - corrected meter model number (typo) "...The alternate fuel dispenser uses a Gilbarco T1^z-x9796 Gs T19976 G5 meter. The meter located in the dispenser's hydraulic cabinet and is electronically calibrated. The dispenser with the T19796 -rrv5 T19976 G5 meter and console were..." There are no visible changes to the internal or external appearance of the dispenser. Certificate of Conformance Number 02-019A21: This certificate supersedes Certificate of Conformance number 02-019A20 and is issued noting a new family series designation for the manufacturer's Encore series,the "Encore 700 S." The Encore 700 S consists of the manufacturers Encore 500 S series and a specific options set known as"Next Generation Payment"or"NGP".NGP was evaluated and approved under CCs 02-019A16 and 02-019Al2.NGP consists of an encrypted pin pad,encrypted card reader and an encrypted display. The encrypted pin pad,encrypted card reader and an encrypted display are not field serviceable. Tampering or disconnecting these components will trigger internal security features.No additional testing was deemed necessary.No photos were provided on the internal components for security purposes. Certificate of Conformance Number 02-019A20: This certificate supersedes Certificate of Conformance number 02-019A19 and is issued to include a new Encore model NJ4 designated as a Multi-Hose Hybrid Blender 3+2. This model will allow the blending of gasoline with up to 85%ethanol (E85). This is a new configuration for the Encore series. All meters, valves and electronics are the same as in previously tested models. The Encore NJ4 was evaluated at the manufacturer's Greensboro facility. The evaluation consisted of testing the NJ4 checking the blending functions. Blend accuracy was based on totalizer readings. The device evaluation was based on the 2011 edition of NIST Handbook 44 and NCWM Publication 14.All of the changes are in the unit's hydraulics in the upper canopy.No photos were provided on the internal components.There are no changes to the external appearance of the dispenser. Previous test conditions are listed below for reference. Certificate of Conformance Number 02-019A19: This certificate supersedes Certificate of Conformance number 02-019A18 and is issued to correct model numbers shown on page 3. Model NG6; Dispenser Single hose; 3+1+1, is not a valid model and has never been produced.NG6 is removed from the model code.Model NL3;Blender dispenser X+ 1;5+1 grades.The description is incorrect. Gilbarco does not produce a 5+1 blender.The description should be NL3;blender dispenser X+ 1;3+1+1 grades.Model number NL8 Blender Dispenser 3+1+1 is incorrect. This model has never been produced. Remove NL8 from the model code. No testing was deemed necessary for this clarification change.