|
® WORKSITE TRAFFIC HAZARDS X Wear reflective vests where exposed to traffic hazards.
<br /> Where the project worksite is Z Where possible,park vehicles as protective shield from oncoming traffic.
<br /> located in/near vehicle Z Configure work area and support vehicles to minimize worker exposure to traffic hazards.
<br /> thoroughfare. ❑Use DOT signal devices to re-route vehicles around work area,site entrances/exits.
<br /> Hazards:Worker injury from being ❑Use DOT-trained flaggers or police detail where appropriate or required.
<br /> struck by vehicle traveling in
<br /> thoroughfare. Geosyntec Procedure(s):HS-517-Traffic Safety
<br /> RAILROAD HAZARD ❑Coordinate with rail company and implement required safety and security measures.
<br /> Hazard:Worker injury from being ❑Site workers to receive safety training for railroad work.
<br /> struck by train in R.R.right-of-way Geosyntec Procedure(s):HS-305-Rail Operations
<br /> WATER TRANSPORTATION ❑Follow HS 312"Water Transportation Safety,"and Section B.3.,"Water/Boating Hazards."
<br /> Geosyntec Procedure(s):HS-312-Water Transportation Safety
<br /> AIRPORT,AIRCRAFT ❑Coordinate safety requirements with Airport personnel and implement required safety measures.
<br /> Worker injury when working ❑Site workers to receive safety training for railroad/airport work.
<br /> on/near airport runway,or use of ❑Follow provisions of applicable Geosyntec HS Procedures,below:
<br /> helicopter,light aircraft Geosyntec Procedure(s):HS-310-Helicopter Safety,HS 311-General Aviation(Small Aircraft)Safety
<br /> ❑ TRAFFIC/VEHICLE HAZARDS
<br /> REALATED TO HEAVY EQUIPMENT, ❑See Section B.7.,"Construction,Heavy Equipment,Lift Equipment"
<br /> CONSTRUCTION SITE ACTIVITIES
<br /> B.3. WATER/BOATING HAZARDS ❑Applicable Z Not Applicable or Not Anticipated
<br /> EXPLANATORY NOTES,CLARIFICATIONS:
<br /> ❑ OPERATOR OF WATER CRAFT ❑Wear regulatory-approved personal flotation device(PFD)or buoyant work vest.
<br /> OR PASSENGER/WORKER ON ❑Bring emergency rescue equipment(ring buoy,reaching device,flares). Use"reach,throw,row,go"strategy.
<br /> WATER CRAFT OR PLATFORM ❑Use fuel safety practices,fire extinguisher present in boat.
<br /> Hazards:Drowning,hypothermia, ❑Have lifesaving skiff/boat available.
<br /> collision,motor/fuel hazards, ❑Monitor weather,develop float plan,ensure navigation/communication equipment operable.
<br /> navigation ❑For tidal,flash flood,dam release hazards,plan/locate work accordingly,other precautions as appropriate.
<br /> ❑ WORK NEAR WATER HAZARDS OR ❑Where ice/slip hazards are present adjacent to water body,and for working directly on ice over water,wear ice
<br /> ENTERING WATER creepers,sand work area,or take other appropriate measures to address slip hazard.
<br /> Hazards:drowning,hypothermia ❑For high-hazard work over very cold water,have immersion survival suit available,as appropriate.
<br /> from water immersion,related ❑For electrical hazards associated with water/wet locations,see Section B.8.,"Electrical Hazards."
<br /> injuries.
<br /> ❑Wading,wetland,mud/silt
<br /> ❑Dam release,flash flood,tide Geosyntec Procedure(s):HS-306-Working on/near Water and Ice,
<br /> ❑Diving HS-312-Water Transportation Safety
<br /> ❑Ice on/near water body
<br /> B.4. FALL HAZARDS ❑ Applicable ® Not Applicable,Not Anticipated
<br /> EXPLANATORY NOTES,CLARIFICATIONS:
<br /> WORKING AT HEIGHTS(GENERAL) General fall protection requirement thresholds:required @>4'(industry),a6'(construction),210'(scaffolds)
<br /> Hazards:Falls,overhead hazards, ❑Ensure guardrails present ❑Restrict access beneath work to protect other
<br /> impalement hazard(such as from ❑Use personal fall apparatus(PFA) site personnel from overhead hazards
<br /> falling onto unprotected rebar and ❑Use tether or positioning device ❑Ensure safe access to elevated work location
<br /> similar) ❑Restrict access to hazard(barriers,tape,sign) (ladder,stair,)
<br /> ❑Ensure covers in place over holes ❑Install caps on protruding rebar
<br /> ❑Use designated"watch person"
<br /> ❑Use fall protection net
<br /> Geosyntec Procedure(s):HS-120-Fall Protection,HS-210-Walking and Working Surfaces
<br /> LADDERS/STAIRS ❑Follow safe work oractices:
<br /> ❑ Extension/straight ladders • Use ladders according to safe practices and manufacturer's instructions.
<br /> ❑ Stepladders • Maintain 3 points of contact at all times on ladder;keep center of gravity within side rails.
<br /> ❑ Fixed ladders • Do not use metal(conductive)ladder near electrical hazard.
<br /> ❑ Stairs • Extension/straight ladders shall be properly footed,secured,angled,extend above upper work surface.
<br /> Hazards: Falls,overhead hazards • Stepladders are set on level ground or properly shimmed,spreaders locked;do not climb/stand on top
<br /> step,top cap,or rear non-climbing side;use step ladder of sufficient length for work.
<br /> • Equip stairs with stair-rails where more than 4 steps,and for stairway height 4'or more.
<br /> Geosyntec Procedure(s):HS-501-Ladders
<br /> Geosyntec° THA(ver.2)—Task 3—Soil Vapor Probe Installation and Sampling October 22,2020
<br /> Lincoln Center-SAC1111 Page 4
<br /> consultants
<br />
|