Laserfiche WebLink
December 14, 2020 <br />Project No. 20-6235 <br />Page 1 <br />AdvancedGeo <br />An Employee-Owned Company <br />....koNs, <br />/VAA <br />EXECUTIVE SUMMARY <br />AdvancedGeo, Inc. (AGI) conducted this Phase I Environmental Site Assessment for <br />the property located at 3009 Pock Lane, Stockton, San Joaquin County, California <br />(subject property or property) in conformance with the scope and limitations of ASTM <br />Standard Practice E1527-13, the Environmental Protection Agency Standards and <br />Practices for All Appropriate Inquiries `AAI' (40 CFR Part 312). <br />PROPERTY USE <br />The subject property is an undeveloped 23-acre parcel in Stockton, California. <br />Based on a review of historical documents, the property was used agriculturally from at <br />least 1937 to the early 2000's. A residence was located on the property during the <br />same time period. The property has since been vacant and undeveloped when all <br />structures were removed. The subject property has been vacant and undeveloped <br />since the early 2000's. <br />FINDINGS <br />Based on the standards set by ASTM Standard Practice E1527-13, a recognized <br />environmental condition (REC) is the presence or likely presence of any hazardous <br />substances or petroleum products in, on, or at a property: (1) due to release to the <br />environment; (2) under conditions indicative of a release to the environment; or (3) <br />under conditions that pose a material threat of a future release to the environment. <br />Conditions that are determined to be de minimis, which do not present a threat to <br />human health or the environment and that generally would not be the subject of an <br />enforcement action if brought to the attention of appropriate governmental agencies, <br />are not recognized environmental conditions. Conditions that are considered Business <br />Environmental Risk include the presence of asbestos-containing materials, lead-based <br />paint, mold or moisture conditions, or non-hazardous regulated materials. <br />The standard further identifies historical RECs and controlled RECs. An historical REC <br />(HREC) is a past release of any hazardous substances or petroleum products that has <br />occurred in connection with the property and has been addressed to the satisfaction of <br />the applicable regulatory authority or meeting unrestricted use criteria established by a <br />regulatory authority, without subjecting the property to any required controls. A <br />controlled REC (CREC) is a REC resulting from a past release of hazardous <br />substances or petroleum products that has been addressed to the satisfaction of the <br />applicable regulatory authority, with hazardous substances or petroleum products <br />allowed to remain in place subject to the implementation of required controls. <br />The following findings are differentiated below as Business Environmental Risks and <br />de minimis conditions unlikely to be subject to government enforcement, HRECs, <br />CRECs and RECs. <br />BUSINESS ENVIRONMENTAL RISKS <br />This assessment has revealed no evidence of Business Environmental Risks in <br />connection with the subject property. <br />DE MINIMIS CONDITIONS <br />This assessment revealed no evidence of potential or de minimis conditions in <br />connection with the subject property.