Laserfiche WebLink
Smith Environmental SITE SAFETY PLAN <br />Physical Hazards <br />Task(s) <br />Hazard <br />Mitigation Measure <br />1 <br />Heavy Equipment (Noise & Physical <br />All heavy equipment used on this project will <br />contact) <br />be in good working order and operated in <br />accordance with recognized industry standards <br />and Cal -OSHA Title 8, Subchapter 4, <br />Construction Safety Orders. In addition, an <br />exclusion zone applies to all personnel. The <br />exclusion zone will be 20 feet to the front and <br />either side of the operating drill rig. Personnel <br />will not be allowed under booms or augers at <br />any time. <br />All equipment operators and ground crews <br />working in close proximity of heavy equipment <br />will be supplied with ear protection. <br />Dust <br />The dust hazard will be mitigated by not <br />allowing ground crew to be located down wind <br />of drilling and excavation activity. In addition, <br />water will be applied to control the dust if <br />visible levels of dust are generated. <br />Fire and Explosion Hazards <br />List Flammable or Combustible materials on-site. Keep sources of ignition away from these <br />materials. <br />Flammable (Flash Point <100 °F) Combustible (Flash Point <200 *F) <br />Gasoline <br />Type and Location of Fire Extinguishers (Show on map for large projects) <br />Dry chemical fire extinguishers Class A B and C. are stored in all Smith Environmental vehicles. <br />PAGE 6 <br />