Laserfiche WebLink
AQUASTAW <br />pool products <br />SUMPLESS, BULKHEAD POOL & SPA SUBMERGED <br />SUCTION OUTLET INSTRUCTIONS <br />VGB SERIES <br />IMPORTANT ADDITIONAL SAFETY INSTRUCTIONS FOR <br />4HPxxx, 4SPAxxx, 6HPxxx, 8HPxxx, R8HPxxx <br />(xxx = COLOR SUFFIX) <br />MEETS OR EXCEEDS ASME/ANSI Al 12.19.8b-2009 <br />ANTI-ENTRAPMENT/ANTI-VORTEX <br />Mod I 4HPxxx <br />4SPAxxx 4HP&4SPATOTAL <br />6HPxxx(21 <br />6HPxxx (1 1/2") <br />OPEN AREA <br />(and 8HPxxx, <br />(and 8HPxxx, <br />( If Contained Spa <br />R8H Pxxx) <br />RBHPxxx) <br />itting-2outlet5) <br />Floor N/A <br />N/A N/A <br />224 GPM @6.3 fps <br />177 GPM @ 5.0 fps <br />Wail 56 GPM@3.5 fps <br />100 GPM @3.0 fps 5.2 sq. in. <br />224 GPM @6.3 fps <br />122 GPM @3.4 fps <br />Rev 083111 <br />1!21m <br />q <br />,4112.1 <br />♦m♦ <br />2007 <br />6HPTOTAL 8HP &RSHP <br />OPEN AREA TOTAL OPEN AREA <br />10.4 sq. in. 15 8 sq. in. <br />10.4 sq. m. 15.8 sq. in. <br />6HP, 8HP & R8HP MAX FLOW IS 224 GPM ALLOWED FOR BOTH FLOOR AND WALL WITH 2" <br />OR GREATER PIPE SIZES <br />WHEN 1.5" PIPE SIZE IS USED, MAX FLOW RATE ALLOWED FOR THE 6HP, 8HP & R8HP IS <br />177 GPM AND 122 GPM FOR FLOOR AND WALL RESPECTIVELY <br />4HP MAX FLOW IS 56 GPM ALLOWED ONLY FOR WALL APPLICATIONS <br />4SPA IS FOR USE IN SELF-CONTAINED, FACTORY -MANUFACTURED PORTABLE SPAS AND <br />HOTTUBS ONLY AND FOR MULTIPLE DRAIN USE ONLY. FLOW RATE ABOVE IS FOR <br />TWO SUCTION OUTLETS. <br />NO SUMP IS REQUIRED. AQUASTAR'S "SUMPLESS SERIES" ARE DESIGNED AND <br />TESTED FOR SAFE FLUSH -MOUNT INSTALLATIONS TOTILE, FIBERGLASS, <br />ACRYLIC, VINYL AND STEEL AS WELL AS PLASTER, PEBBLE, CONCRETE, ETC. <br />ABS BULKHEAD ADAPTER FITTING MUST BE SECURELY ATTACHED TO PLUMBING <br />WITH PROPER GLUE. USE ABS TO PVC TRANSITIONAL GLUES (SUCH AS: OATEY ° <br />WELD -ON ° AND OTHER GREEN NSF GLUES) <br />DO NOT USE CLEAR, "HOT", "BLUE" OR ANY FAST SET GLUES WITH ANY AQUASTAR POOL <br />PRODUCTS <br />ESPECIALLY WHEN RETRO -FITTING, EXTRA SECURE INSTALLATIONS CAN BE OBTAINED <br />BY APPLYING WET AND DRY EPDXY, SILICONE, ETC. TO UNDERSIDE OF BASE PLATES. <br />AFTER INSTALLATION OF BULKHEAD ADAPTER FITTINGS, IF A GAP EXISTS BETWEEN POOL <br />FINISH AND BASE OF COVER IT MUST BE FILLED IN WITH A 2 -PART EPDXYTO AVOID <br />FINGER OR OTHER ENTRAPMENT. <br />P 877-768-2717 F 877 -276 -POOL info@aquastarpoolproducts.com www.aquastarpooIproducts.com <br />